nRF Modem library (libmodem) in Zephyr firmware: identifiers and CRA notes

What it is

nRF Modem library (libmodem)

• Homepage
• Repository

Notes on this component

An nRF Connect SDK addition on top of plain Zephyr: the library that lets the application processor of an nRF91 Series part use its cellular modem, in a group (`groups: [libmodem]`) the manifest excludes by default. Nordic's nrfxlib documents the Modem library as "a binary library" (`nrf_modem/README.rst` in nrfxlib), so it is flagged a binary blob: what is inside it cannot be read from the source tree. The libmodem repository itself is not publicly readable, so its contents were not inspected for this row; the binary flag rests on that nrfxlib page. Ask Nordic Semiconductor, through the nRF Connect SDK support channel, for the component list and the product-security notices of this library. The upstream states no CPE, so none is written: no known identifier.

Where it hides in a firmware SBOM

Zephyr lists a west module by its west name, with no PURL or CPE. Vulnerability feeds cannot find it from that listing alone, which is why the SBOM check adds the identifiers below.

The identifiers we assign

PURLpackage URL: a standard way to name a software package

pkg:github/nrfconnect/libmodem@{version}

{version} is filled in from your build. The version is pinned to the upstream commit your build uses.

The SBOM check adds these identifiers to a component your build listed without them.

Honest gaps

Vendor: nordicsemiconductor.

This row has no CPE.

Where this row comes from

https://github.com/nrfconnect/sdk-nrf/blob/ec3876d5bc676f342af3c63c49c675b66b4ca275/west.yml
Checked on 13 October 2026.

Known vulnerabilities

Not checked yet

Vulnerability data changes daily. Check the version you ship in the SBOM check.

CRA notes

• List this component in your SBOM. Annex I, Part II (1): Identify and document components and vulnerabilities, including an SBOMKnow what is in your product. Identify and document its components and their vulnerabilities, including by producing a software bill of materials (SBOM) in a common machine-readable format that covers at least the top-level dependencies.
• Ship the version with no known exploitable vulnerabilities at release. Annex I, Part I (2(a)): Made available without known exploitable vulnerabilitiesWhen you place a release on the market, it must not ship with known vulnerabilities that can be exploited in your product. "Exploitable" means an attacker could effectively use it under practical operating conditions (Article 3(41)), not only in theory or in a lab. The Commission's draft guidance (C(2026) 5252, points 231 to 237; a draft, not binding) gives three ways a vulnerability is "known". One: it is listed in a relevant public vulnerability database, such as the European vulnerability database (EUVD) or another prominent one. Two: you learned of it from information that is not public, for example a security researcher's coordinated disclosure or your own testing and analysis; a vulnerability you know about and have not disclosed still counts. Three: it has been publicly and prominently reported in reliable media, whether specialist security publications or general news. A report is not yet proof: it does not by itself mean the vulnerability can be exploited in practice or applies to your product, so investigate promptly and confirm whether it does. A limited time may pass between the first report and that confirmation. If a vulnerability becomes known shortly before release, you decide from your cybersecurity risk assessment whether the release can go out or the vulnerability must be fixed first. Weigh its severity, exploitability and potential impact, and the risks to the product once in use; you may also weigh the risks of delaying the release, for example because it fixes other exploitable vulnerabilities. After release, the Part II vulnerability handling requirements still apply. Check your components against vulnerability databases before each release, and fix or justify what you find.
• This ships as a binary. Ask the vendor for their SBOM and their advisory feed. A request you can send Annex I, Part II (1): Identify and document components and vulnerabilities, including an SBOMKnow what is in your product. Identify and document its components and their vulnerabilities, including by producing a software bill of materials (SBOM) in a common machine-readable format that covers at least the top-level dependencies.

Source: Annex I of Regulation (EU) 2024/2847 (Cyber Resilience Act), legal state 2026.10.13-1.

Related Zephyr components

No related components yet.

Guides that mention nRF Modem library (libmodem)

• The CRA for Zephyr developers: what the law asks, what west spdx gives you, and what is left

Next step

Declarable prepares documentation for you to review. It is not legal advice and not certification. You sign your own declaration of conformity.